Simple Solution for Non-Simple Handrail Projects

slip on pipe fittings

Simple Solution for Non-Simple Handrail Projects

EnduRail Structural pipe fitting, also known as a slip-on pipe fitting, tube clamp fittings, or pipe clamp is used to build structures such as handrails, guardrails, modular barricades, solar panel support, and other types of pipe or tubular structure. Endurail fittings are the best option for DIY enthusiasts for more creative applications such as bench, coffee table, modular GYM, clothing racks, shelves, and building architectural use. Because of the modular design of standard fittings, assembly is easy without welding or threading and only simple hand tools are required.

There are endless possibilities to build tubular structures as there are more than 50 types of slip-on pipe fittings combine in many ways to create any custom structure. Fittings used are aluminum alloy castings, and come in many styles such as elbows, tees, crosses, flanges, and adjustable tube clamp fittings. The fittings are not threaded; they simply lock onto the pipe with the supplied hex set screws.

Vibro Finish fittings

The primary advantage of Endurail fittings is its simplicity to use. The fittings slip on the pipe and are usually locked down with a set screw. Using only an allen key when the knurl point set screw is tightened down it locks the fittings into the pipe and a connection equivalent to a weld is created. Do not let its simplicity fool you into thinking the connection is week. Endurail fittings are rated for more than 400 kg of pull-out force. This strength qualifies for use in most industrial applications.

Other advantages of using structural pipe fittings are easy installation and reconfigurable design. Since there are no permanent welds in the structure, the set screws of the fittings can simply be loosened, allowing them to be repositioned. The project can be disassembled and stored if needed, or even taken apart with fittings and pipe recycled into a new project.

Keep viewing more on structural pipe fittings @ https://youtu.be/j2URpQK-9Jk

To start any handrail project just plan for pipe, fittings, and simple tools. Mark chalk line and base flange positions. Drill anchor hole and start installation by cutting pipes of required size. There is no welding, threading or special permits required when you use Endurail modular handrailing in your projects saving you both time and money.

Keep viewing more at Endurail Projects & Advantage – https://youtu.be/9GlOv59vjpo



×